SPARE PARTS

VIBRATING FEEDER

CONTACT US

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.

    • BOTTOM PLATE

      Applicable Equipment:GZD-960×3800,GZD-1100×4200,GZD-1300×4900,GZD-1500×6000

      Parts Property:Quick-wear Parts

      Parts function:Bottom Plates are installed aside the Side Plates, in the center of the machine. When stones are fed to the vibrating feeder, they impact the bottom plate firstly. So the bottom plate can protect the machine body very well.

      BUY NOW
    • SPRING

      Applicable Equipment:GZD-960×3800,GZD-1100×4200,GZD-1300×4900,GZD-1500×6000

      Parts Property:Quick-wear Parts

      Parts function:Springs are installed at the two sides of vibrating feeder. When the machine starts to work, it will vibrate up and down. The springs can well solve this problem and ensure that machine body vibrate in designed track.

      BUY NOW
    • GEAR

      Applicable Equipment:GZD-960×3800,GZD-1100×4200,GZD-1300×4900,GZD-1500×6000

      Parts Property:Common Parts

      Parts function:Gear is the key parts of vibrating feeder transmission. They drive the eccentric shaft of the machine and then the vibrating force is produced. If gears are damaged, the machine will be quite unsteady and even break out.

      BUY NOW
    • SIDE PLATE

      Applicable Equipment:GZD-960×3800,GZD-1100×4200,GZD-1300×4900,GZD-1500×6000

      Parts Property:Quick-wear Parts

      Parts function:Cross shafts are installed at the edge of quincunx-frame, hanging all rollers. At the two sides of the cross shaft, two rubber sleeves are used to protect them from being abraded. In case that them are damaged, the machine will break down.

      BUY NOW
    • Oil resistant rubber seal ring

      Applicable Equipment:GZD850×3000,GZD960×3800,GZD1100×4200,GZD1100×4900,GZD1300×4900,GZD1500×6000

      Parts Property:common parts

      Parts function:Seal ring usually used for sealing, for preventing the internal oil from leaking out. Seal ring also can prevent the water and dust from outside.

      BUY NOW
    • Grate Bar

      Applicable Equipment:GZD850×3000,GZD960×3800,GZD1100×4200,GZD1100×4900,GZD1300×4900,GZD1500×6000

      Parts Property:Quick-wear parts

      Parts function:Grate bar is installed at the front of vibrating feeder and is used to screen the feeding material, its gap can be adjusted according to requirement. Grate bar is easy to be abraded and should be replaced in time.

      BUY NOW
    • Grate Bar

      Applicable Equipment:GZD850×3000,GZD960×3800,GZD1100×4200,GZD1100×4900,GZD1300×4900,GZD1500×6000

      Parts Property:common parts

      Parts function:Bearing seat is installed outside of the bearing to support and fasten the outer ring of bearings. Bearing seat and bearing keep the shaft work well when the machine is running.

      BUY NOW

CONTACT US

Thank you for your interests in Liming Heavy Industry. Please feel free to submit your inquiry information to us. our sales manager will contact with you as soon as possible.

Click here, chat with me

Tel: 0086-371-86162511 Fax: 0086-371-67992699

Email: info@limingco.com MSN: SalesCrusher@hotmail.com

Address: No.169, Science (Kexue) Avenue, National HI-TECH Industry Development Zone, Zhengzhou, China.